USB Mount Cable - Rerii 2M 6 Feet USB and 3.5mm Aux Extention Mount, Flush, Dash, Panel Mount Cable for Car, Boat, Motor

: IN STOCK At Supplier , Delivery Is Estimated 15 - 20 Working Days

Regular price R 271.00 Incl Vat

Solid Material Made and Well Molded | This Flush Mount USB Port & Headphone Jack is soild made and the ends are molded well and the USB mount cable is well attached and fairly thick,which is sufficiently long enough for your project | Screw threads on jack end are solid and strong enough to keep it where you put it and stand up over time | The USB flush cable can be mounted in a hole,in place of your cigarette lighter,or anywhere else using the included plastic flange | The usb panel cable comes with two options to mount,a bracket that you can screw in somewhere that will hold the unit, or you can drill a hole and mount the unit in your dash (or wherever) and use the supplied nut to hold it in place | If you're looking to add a USB power port or connection somewhere in your vehicle this is a very good option | DIY Your Car, Boat and Other Devices | The USB flush mount cable is perfect for stereo installation on ATVs,UTVs,cars and trucks,etc.Below are some good experience required | " | This USB mount cable just what you need to bring your Pioneer radio connections from the back of the radio to where they are easily accessible | ". | " | The USB connector fit snug into the back of the Pioneer even if the connector did not look as if it was in as deep as you might expect;The 3.5mm connector can fit in the back of the Pioneer,then secure the cables at the back of the device to keep any strain on the cable from pulling the connectors out | ". | " | Used in a 2007 Nissan Xterra when installing a Pioneer AVH-X2700BS. It replaced the factory installed, dash-mounted 3.5 mm aux input and the existing hole in the dash was a perfect fit.This product looks as if it was OEM and I really like having the aux input and USB port in the same place where the factory input was located | ". | " | Used it for an extension for my trucks head unit since the usb/aux plugs are on the back.The hole size is just slightly bigger than 1".I have a 2006 F150 supercrew. I drilled a 1" hole in between the rear cup holders on the center console. Then used a drimmel to clean up the hole and adjust size to a perfect tight fit.They now can charge a device and listen to the rear monitors with headphones | ". | Mounting Options for Any Application | Rerii provides all the components you might need to put in a permanent USB/AUX port install into a boat or car,the dash panel cable comes with a detachable cover,mount,and two different sized retaining rings that screw onto the back,which makes everything fit nice and snug | You are free to use this flush mount cable to provide a permanent set of ports on the panel in a truck. | Components are a stiff rubber/plastic,so are probably compatible with a damp environment as long as the electircal connectors are kept dry | Such a flush panel mount cable is a nice solution for those people who with older technology.If your stereo has bluetooth, you're all set to connect your iphone or android,but what about your old iPod classic? Or Zune HD? This give folks with rear-usb and aux inputs the opportunity to hide all the wires behind the dash and have a convenient usb and aux jack in place of a cigarette lighter | Easy Installation and Package Content | Installation: | Just drill the appropriate sized hole,slide in the USB AUX Extension piece,thread on the plastic nut,and tighten.If the flush mount cable is longer than you need,you can coil it up and tape it off.Fially you will see everything works fine and you will also glad you have added this to your stereo | Packaging Aside: | -The cable thing (all one unit) | -The dash mount bracket | -Four screws to mount said bracket | -The dust cover cap | -One flanged washer | -One normal washer | If you are trying to find one that would fit where a factory cigarette lighter,then the USB mount cable would fit and work well | If you need this to mount a USB and AUX on a panel somewhere, his is as good as you'll find

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Category:

Solid Material Made and Well Molded | This Flush Mount USB Port & Headphone Jack is soild made and the ends are molded well and the USB mount cable is well attached and fairly thick,which is sufficiently long enough for your project | Screw threads on jack end are solid and strong enough to keep it where you put it and stand up over time | The USB flush cable can be mounted in a hole,in place of your cigarette lighter,or anywhere else using the included plastic flange | The usb panel cable comes with two options to mount,a bracket that you can screw in somewhere that will hold the unit, or you can drill a hole and mount the unit in your dash (or wherever) and use the supplied nut to hold it in place | If you're looking to add a USB power port or connection somewhere in your vehicle this is a very good option | DIY Your Car, Boat and Other Devices | The USB flush mount cable is perfect for stereo installation on ATVs,UTVs,cars and trucks,etc.Below are some good experience required | " | This USB mount cable just what you need to bring your Pioneer radio connections from the back of the radio to where they are easily accessible | ". | " | The USB connector fit snug into the back of the Pioneer even if the connector did not look as if it was in as deep as you might expect;The 3.5mm connector can fit in the back of the Pioneer,then secure the cables at the back of the device to keep any strain on the cable from pulling the connectors out | ". | " | Used in a 2007 Nissan Xterra when installing a Pioneer AVH-X2700BS. It replaced the factory installed, dash-mounted 3.5 mm aux input and the existing hole in the dash was a perfect fit.This product looks as if it was OEM and I really like having the aux input and USB port in the same place where the factory input was located | ". | " | Used it for an extension for my trucks head unit since the usb/aux plugs are on the back.The hole size is just slightly bigger than 1".I have a 2006 F150 supercrew. I drilled a 1" hole in between the rear cup holders on the center console. Then used a drimmel to clean up the hole and adjust size to a perfect tight fit.They now can charge a device and listen to the rear monitors with headphones | ". | Mounting Options for Any Application | Rerii provides all the components you might need to put in a permanent USB/AUX port install into a boat or car,the dash panel cable comes with a detachable cover,mount,and two different sized retaining rings that screw onto the back,which makes everything fit nice and snug | You are free to use this flush mount cable to provide a permanent set of ports on the panel in a truck. | Components are a stiff rubber/plastic,so are probably compatible with a damp environment as long as the electircal connectors are kept dry | Such a flush panel mount cable is a nice solution for those people who with older technology.If your stereo has bluetooth, you're all set to connect your iphone or android,but what about your old iPod classic? Or Zune HD? This give folks with rear-usb and aux inputs the opportunity to hide all the wires behind the dash and have a convenient usb and aux jack in place of a cigarette lighter | Easy Installation and Package Content | Installation: | Just drill the appropriate sized hole,slide in the USB AUX Extension piece,thread on the plastic nut,and tighten.If the flush mount cable is longer than you need,you can coil it up and tape it off.Fially you will see everything works fine and you will also glad you have added this to your stereo | Packaging Aside: | -The cable thing (all one unit) | -The dash mount bracket | -Four screws to mount said bracket | -The dust cover cap | -One flanged washer | -One normal washer | If you are trying to find one that would fit where a factory cigarette lighter,then the USB mount cable would fit and work well | If you need this to mount a USB and AUX on a panel somewhere, his is as good as you'll find

SHOP WITH 100% CONFIDENCE WITH PC LINK COMPUTERS MONEY BACK GUARANTEE

All purchases are insured, and guaranteed to arrive as described.Order delivered within 45 working days or your money back.
Standard Shipping Fee of R250 for all orders under R10 000 which includes all fees (Customs, VAT, & Insurance)

In Stock:

IN STOCK refers to the product being in stock with our suppliers overseas. This means we are able to procure the product, it does not mean that we have the product in stock at our offices in South Africa.

We sell both new and pre-owned products. Our site is pulls data from various overseas websites and are not always brand new products. It is up to the customer to query whether or not these products are new or pre-owned products.

Delivery info:

Delivery is estimated at 10-20 Working Days. All Products on this website are Imported From the USA.

We are not responsible for delayed deliveries caused by any problems which may arise due to the importation of goods. This includes, but is not limited to, USA suppliers delaying orders, customs detaining shipments, acts of God, SARS inspections, customs inspections, Port Health inspections or flight delays.

Some electrical good from the USA and UK are rated 120v and will not work in South Africa unless used with a power converter. We do not supply transformers from 220V to 110V. This needs to be purchased separately.

Payments:

We accept Credit, Debit & Cheque cards (Visa & Mastercard), Instant EFT, Mobicred, Masterpass, Scode, Zapper, SnapScan and Bitcoin.

All transactions are handled by PayFast, a South African payment processing service secured by 256-bit encryption and SSL technology.

Please Note:

Please also note that certain items cannot be imported, these include Alcohol, Agricultural Remedies, Animals, Batteries, Flammable Materials, Farm Feeds, Currency, Food, Furs, Chemicals, Explosives, Medications, Plants, Poisons, Seeds, Supplements, Nutrients, Pressurized Cans, Tactical Equipment, Vitamins, Weaponry and Weaponry Accessories. In these cases, information displayed above is for reference/informational purposes only and the item will not be imported. All content is generated and displayed from an automated USA product feed, and if the item cannot be imported for any reason, including carrier restrictions and/or import or sales restrictions under South African or American law, we do reserve the right to cancel and refund the order in full.

No Stock:

Our suppliers do not always inform us that stock is unavailable and often only notify us once the order has been placed with them. In this case, the customer will be notified that there is no stock. The order will then be cancelled and a full refund will be processed.

Please also ensure that you are ordering the correct item for your particular application as returns to the USA are costly. Please note that you will be liable for 30% restocking fee and the shipping cost to send the item back to the USA. If you have any queries please contact us before making any purchase for any service through this website

 

USB Mount Cable - Rerii 2M 6 Feet USB and 3.5mm Aux Extention Mount, Flush, Dash, Panel Mount Cable for Car, Boat, Motor

Regular price R 271.00 Incl Vat